Tapping machine:- IYALIA Mould Insert Tapping machines are high-speed tapping, which is 3 seconds cycle time. The machine is a fully automatic tapping machine where the parts are fed automatically by a bowl feeder system, and the vibration moves the component to the next stage. The component moves down with gravity through a tube, then the part is transferred to the fixture. The tapping spindle runs at 3000 RPM, and the tapping approach takes 1 second, tapping takes 1 second, and releasing the part and clamping the next part takes one more second. The tapping machine uses different technology, with servo controls, tapping up and down movement and spindle rotation resynced together to get the exact pitch control system. Thread formation happens so fast that it needs the coolant system, which cools the cutting tool. If some thread does not form, the machine will deduct that and stop. This will indicate that there is some problem, which can be rectified immediately. The machine spindle stops in case of power failure. Once the power comes back on, the following two parts will be pushed into a separate bin, where the inspection team has to check the quality and then move the part to OK/rework. With this high-speed IYALIA SPM Tapping machine, you can be sure of three things, fastest production it works automatically Only threaded parts are in the OK bin; no rejection part goes into the production line. Introducing the Mould Insert Tapping Machine - a high-speed, fully automatic tapping machine that produces threaded parts in just 3 seconds. With its advanced servo controls and spindle rotation resynced technology, you can be sure of a precise pitch control system and the fastest production rate. The machine has a bowl feeder system that automatically feeds the parts, and the vibration moves them to the next stage. The components move down with gravity through a tube and are transferred to the fixture, where the tapping spindle runs at 3000 RPM. The tapping process takes just 1 second, and the machine has a coolant system that cools the cutting tool to prevent thread formation issues. In the event of a power failure, the machine spindle stops, and the following two parts are pushed into a separate bin for inspection. This ensures that only threaded parts are in the OK bin and no rejection part goes into the production line. The IYALIA SPM Tapping Machine is an efficient and reliable solution for your tapping needs. With its automatic operation and quality control measures, you can trust that your production is in good hands. YouTube link:- https://youtu.be/s1lR_vxY0tU?si=J7dSEIvXD0C_eudh